Short of installing the lower rubber tack strip and decklid cable runner tube the major repair phase of this install is finally complete.
Shot a good coat of epoxy primer then installed the original hardware
It was actually very satisfying putting this hardware in. felt like the car was "going back together" even if ever so slightly.
Two larger bolts fill the removable fender brace which are found on pushrod cars.
My weld joint where I had to cut this shelf is almost undectable.
Shot a good coat of epoxy primer then installed the original hardware
It was actually very satisfying putting this hardware in. felt like the car was "going back together" even if ever so slightly.
Two larger bolts fill the removable fender brace which are found on pushrod cars.
My weld joint where I had to cut this shelf is almost undectable.
Comment