Engine room details

[JTR70]

Hey Bruno, yes, the thin metal straps where the tail light grounds. You could just as easily run a small length of wire to serve as a ground. As for back wall detail, I don't have a 356 that "new" to take photo. Hopefully John or Phil will see this and take shot of theirs for you. 25 years goes by in a hurry doesn't it??
Happy New Year BTW!
Justin

[Bruno356]

Hi

At the bottom are some metal strips welded. Maybe there are more on the replaced part?
A third part left and right?
And how much on the back?





There are holes in the back. Two with d: 30mm and one with d: 50mm.
At the end, are they closed with a rubber and what they are for?








There was a thin stripe welded outside. I think there is for grounding the rear lights. Unfortunately they did not replaced bevor mounting the outer panel. Where are they welded or is there a better solution for grounding the rear lights?



25 years build up with a lot of breaks. Unfortunately I do not remember me to all those detail!

Thank you very much for suggestions!

Happy New Year

Bruno