Dimension request

[Porscheke]

Hello

I'm replacing the batterybox at the moment.
Only forgot to measure 2 dimensions



Could someone here check the dimensions "A"(top) and "B"(bottom).
(distance between suspension tubes and batterybox back wall)

Thanks
Bart

[JTR70]

Hi Bart,

I'll try and get that bottom measurement for you today. Since the wall just has to run nice and vertical the top measurement won't matter much.

Justin

[Porscheke]

Hi Justin

Thanks! Really appreciate it.

Looking forward to the dimension

Grts
Bart

[JTR70]

Hi Bart,

I'm getting an average distance of about 12mm between the bottom tube and the wall.
HTH.

Justin

[Porscheke]

Hi Justin.

Ok, thanks for the measurement.

Grts
Bart

[JTR70]

Use it as a baseline measurement Bart. I checked two cars and one was a little closer than the other at about 11MM's. I also found one corner to be tighter than other, side to side. Just shoot for your best average fit. Best of luck!
Justin