Tweet
Has anyone have or know of someone that does have the tool to check the trialing arms. I'm starting to put the front suspension back together and on the passenger side i'm having difficulty getting the link pins in. I had to drive them in they aren't real tight but not right. with the pins in and lubed the up and down of the suspension is tight. the drivers side pins went in easy and works nice and free. i checked the spindle were the backing plate fits with a digital angle finder and its about 90 deg.to the car. using a straight edge on the end of the trailing arms i'm at about 5-6 mm. THANKS !
Jay D.
Jay D.